Kessy
Prog.
Operation
manual
‐
6
‐
Pic.7 Key position during programming.
If key or chip reading is successful its type and state will be displayed on LCD (pic.8, 9, 10). Press
‘Enter’ to continue.
Pic.8 Message for brand new key
or chip.
Pic.9 Message for locked key or
chip.
Pic.10 Message for key or chip
that had been already registered
in current Kessy unit.
If the key or chip is unlocked or had been already registered in current Kessy unit, Kessy Prog device will
program it (“Writing TP…” message will appear) and modify EEPROM content (“Writing EEPROM…”). If
programming process completes successfully you will see next message several second later: “Program TP#5
successfully” (#5 is used as example). Key registration procedure is completed now. Press any key to return to
main menu.
If the key has improper type or is locked, you cannot use it. Pres ‘Return’ button and use proper key.
If an error occurs on key reading or writing, message “Hitag
write
auth
error” will be shown. You should
repeat the whole procedure for this key or chip.
