Page 3 of 10
♦
Tighten all three studs and return the discriminator back to its normal position.
Alignment Checks
Once the CF8000 has been securely fitted to the vending machine, check reject
lever operation and coin chute alignment. Do this without any power applied to
the machine.
Cable Connection
The CF8000 may be fitted with more than one cable,
these may be intended for TX-RX communications,
drive an external display or to extract audit data.
Once all relevant cables are connected and before
closing the machine door, tuck any unused cables away
tidily ensuring that none are trapped between the reject
lever mechanism and the vending machine door. You
can now switch ON the power to the vending machine.
4mm
Lid
Lever
Reject
Button
Check there is a minimum 4mm gap between
the machines reject lever mechanism and the
CF8000 reject button.
Press the machine lever a couple of times and
ensure the lid of the discriminator opens and
closes correctly.
Check machine coin chute alignment by inserting
two of each coin denomination through the coin
entry slot of the machine.
Ensure that the inserted coins fall freely into the
CF8000 and exit out into the machines cash
return cup.
Product
Dimensions
H: 371mm
W: 138mm
D: 80mm
