Page 8 of 10
Alert Messages
An Alert message on the display allows you to pinpoint a fault that may have
occurred on one of the modules of the changegiver
. These types of fault can be
rectified at the machine and can be for example caused by; a coin jam, dirt built
up or the cassette has been removed etc.
Alert Message
Changegiver Maintenance
Discriminator error
Accept gate error
Separator module sensor error
Tube cassette error
Dispenser module error
Predefined Cassettes
The CF8000 has stored in memory a selection of predefined tube cassettes that
provide different payout options. These additional payout options can be
activated by entering the correct “Cassette Code” on the keypad.
The “Cassette Code” can be found on the front label of the cassette.
To select a predefined cassette, press the ‘Mode’ button then ‘D’ followed by the
button code. Finally select ‘Accept’ from the menu to confirm and save.
Note: You must have the correct cassette payout fitted and empty of coins as
the CF8000 will need to calibrate the new cassette.
