3.3 Deactivating automatic summer/winter time ad-
justment
Press
e
for 5 seconds, then press
i
.
The symbol
f
appears in the display. Automatic summer/winter
time adjustment is deactivated.
3.4 Manual summer/winter time adjustment
Press the
f
button until the correct time is displayed.
If the symbol
f
appears in the display, the summer/
winter time setting cannot be changed manually.
3.5 Setting switching point commands
When
s
is pressed, the first switching point
ON
appears in the
display.
d
Set day/day block (see 1.2)
h
Set hours
m
Set minutes
If
s
is pressed again,
OFF
appears in the display for the next
switching point to be entered.
d
Set day/day block (see 1.2)
h
Set hours
m
Set minutes
The switching points are set automatically without additional
saving.
By pressing the
s
button again enables the next switching point
to be programmed.
The current time is displayed again after 60 seconds or
by pressing the
i
button.
Two-channel timer:
press
s
, then
a
to select channel
B
, and
continue as described above.
3.6 Changing switching points commands
Press
s
repeatedly until the desired switching point appears in
the display.
To set the new times, proceed as described in 3.5.
The current time is displayed again after 60 seconds or
by pressing the
i
button.
3.7 Deleting switching points commands
Press
s
repeatedly until the desired switching point appears in
the display.
Press
h
repeatedly until
−−
:
−−
appears in the display.
s
The switching point is deleted and the next switching point is
displayed.
The current time is displayed again after 60 seconds or
by pressing the
i
button.
Two-channel timer:
press
s
, then
a
to select channel
B
, and
continue as described above.
The current time is displayed again after 60 seconds or
by pressing the
i
button.
3.8 Manual and permanent switching
Repeated pressing of
o
displays the following operating modes:
Automatic off (
OFF
), Automatic on (
ON
), Permanent off (
OFF FIX
),
Permanent on (
ON FIX
).
Two-channel timer:
Press the
a
button to select the desired
switching channel
A
or
B
, then continue as described above.
With the settings permanently on (
ON FIX
) or perma-
nently off (
OFF FIX
) the stored programme will be by-
passed without the loss of the programme values.
The current time is displayed again after 60 seconds or
by pressing the
i
button.
4 Special functions
4.1 Deactivate individual switching points
Recall the switching point by pressing
s
and deactivate it by
pressing the
o
button.
[ ]
is displayed above the colon. This
switching point remains inactive until it is reactivated.
Activating the switching point: recall the switching point by pressing
s
, then press
o
:
[ ]
appears in the display above the colon.
Two-channel timer:
press
s
, then
a
to select channel
B
, and
continue as described above.
The current time is displayed again after 60 seconds or
by pressing the
i
button.
4.2 Holiday switching
This function enables the switching channels to be set permanently
On
or
Off
for a maximum period up to 99 days without the pro-
gramming of the switching points having to be changed.
Holiday switching is not possible in
ON FIX
or
OFF FIX
(permanent switching) switching modes. This is indicated
by the symbol
FIX
flashing in the display.
Press the
d
button for 5 seconds until
0 d
appears in the display.
Press
d
repeatedly until the desired number of days appears in
the display.
o
Select the desired switching mode
OFF
or
ON
.
Do not press any other button after this, otherwise the holiday
switching mode will be deactivated again.
Two-channel timer:
press the
d
button for 5 seconds until
0 d
appears in the display.
a
Select channel
B
.
Then proceed as described above.
