cleaners. Use a damp cloth for cleaning.
VII. Do not allow the same still picture to be projected for a long time or an abnormally bright video
picture to be projected. The video image could be burned in to the display device.
Installation Procedures
Unpacking
Remove the EX-G058 from the shipping container and examine it for any signs of shipping
damage or missing items (check with package contents above). All shipping items should be saved if
the product is to be moved or returned for service. Shipping unit back to dealers for service not in the
original box may result in voiding warranty or additional cost.
Placement
The unit uses convection to cool. A fan is not needed, so do not block the sides of this device or
stack another device on the top or bottom of the EX-G058.
Connections
We recommend the highest quality cables for both input and output connections.
1. Switch off the EX-G058 and all devices that you want to connect.
2. Connect 4 monitors, projectors or other displays that comes with DVI inputs by using male-to-male
DVI cables to EX-G058 DVI outputs.
3. Plug in DVI to DVI/VGA breakout cable
(DDVY01)
to DVI-IN and plug in VGA to component
breakout cable
(VYPBA01)
to the VGA connector of the breakout cable.
4. Connect a device equipped with DVI output (such as PC) to the DVI connector of the breakout
cable.
5. Connect a device equipped with component video output (YPbPr such as DVD player or camera)
to the 3-RCA jack of the
VYPBA01.
6. Connect a device equipped with VGA output (such as laptop) to the VGA connector of EX-G058.
7. Connect a device equipped with composite video output to composite input of the EX-G058.
8. Connect your computer with the EX-G058 by a 9-pin RS-232 adapter and then install the software.
9. Power up the EX-G058.
10. Switch on all devices connected and then control the display output through RS-232 and software.
Page
10 of 25
