X Start, X End, Y Start, Y End
For each display, users can define which section in the resulting mixed video should be displayed.
After setup the X Total and Y Total, users need to define the upper-left (X Start, Y Start) and
bottom-right (X End, Y End) corners for each display. The area to be displayed by default is quad view
as shown.
To activate the new settings for each display, please click the “Window x” button under
“Update Parameters” section on the left of the control interface.
Enable All, Disable All, Default Layout
Clicking on “Disable all” button will make all the connected monitors have an identical display, i.e.,
the output from the front end mixer. “Default Layout” will replace the current display layout with the
default quad view layout. “Enable All” button updates the connected display with the setup parameters.
In “Temperature Type”, there are two types of temperature representation, Celsius and Fahrenheit,
for the VFD display.
Page
20 of 25
