Inputs and Outputs
The EX-G058 has four inputs and accepts both graphics and video signals, which come from
computers and NTSC/PAL video sources respectively. There is a concept of main channel and sub
channel for this device. You can pick up two of the four inputs, one is for main channel and the other is
for sub channel, and then the EX-G058 will display two of them simultaneously on the same screen.
Figure 2 shows the rear panel connectors for the video inputs of a EX-G058 and Table 1 illustrates
how you can connect video devices and display to EX-G058.
Figure 2: Rear Panel
*Default: Turn on the EX-G058 then switch both two DIP switchers simultaneously up
and down to factory default mode.
*These IO ports support various resolution from 640x480 up to 1920x1200, for more
detail of the supported modes, please refer to the Appendix – Supported
Resolution.
Page
8 of 25
