8
3
SD Card Status:
：
SD Card has not been inserted or malfunction.
：
SD Card is proceeding file testing.
：
SD Card is functioning normally.
C
：
Disk full and overwrite record.
When SD card is not inserted, record and playback function is inapplicable, but
monitoring is applicable.
6.3 Record Mode
1. Start Record: 3 Types of recording mode.
(1)
Manual Record:
Suitable to record at anytime. Press
《
Rec
》
button, to enter manual
recording status (start recording). For more information, please refer to
【
7.4 Record
Setup
】
.
(2)
Motion Detection Record:
Suitable to record, when there are severe image changes.
Motion detection triggers schedule recording, but it will only start recording when the
variation exceeds the alarm limitation value. For more information, please refer to
【
7.3
Record setup
】
and
【
7.4 Record Setup
】
.
(3)
Continuous Record:
Suitable on few constant frame recording or on long-term
continuous recording. For more information, please refer to
【
7.4 Record Setup
】
.
2. Stop Record:
Press
《
Stop
》
button, stops manual recording only. Enter
《
Play
》
or
《
Menu
》
schedule recording (Motion Detection and Continuous Record), all kinds of recordings
will be stopped. To continue recording, please follow the methods below to restart
recording.
Manual Record
Repress
《
REC
》
button.
Schedule Record
Motion Detection Record
After exit playback or menu mode, whether the setup has
been changed or not, the system will auto re-check the
record schedule setup again.
3. Record Display:
:
Indicates recording is in progress.
：
Manual Record
：
Schedule Record
：
Motion Detection Record
2
0
0
4
/
0
2
/
0
1
0
8
:
1
0
:
0
3
