6
5. BASIC CONFIGURATION
1.
Power:
Use the power adaptor supplied, nickel metal hydride (NiMH), alkaline
batteries.
2.
Video System:
Connect the camera, the device auto detects NTSC/ PAL video system
(the output video system will be setup the same as its input video system). Without
connecting the camera, the video system setup will be the same as its previous setup.
3.
Power Switch:
Switch to DC when using the supplied power adaptor or switch to
BATT when using battery.
Please use appropriate SD Memory Card (256MB or above), otherwise the recording
data will present intermittent conditions.
Withdraw SD card only when the device is switched off or currently under main menu
display, otherwise system may be unstable or data stored in the SD card may be
damaged.