32
7.3.1 Energy Settings
If the power saving mode is turned on, the data logger will switch to standby mode after
every completed measuring cycle. As soon as a new measuring task is supposed to take
place, the data logger switches back to internal operating mode, connects to all inverters,
evaluates data and sets outputs if necessary. All operating elements and the display are still
turned off. In order to manually wake the device press the
“WAKE” button or the
key.
Currently a combined use of data transmission via network (Ethernet) and power saving
mode is not possible.
7.3.2 Memory Settings
In this menu item, existing buffers can be named and intervals for measuring and storage
rate can be set. The specification is made in seconds. Please mind the necessary time for
connecting to devices and the internal processing time of the data logger when entering the
intervals. Those two factors are subject to change and depend on the devices connected.
You can check the required time for a full measuring a
nd evaluation in “Online Values” for
the device “System” and the channel “Cycle Time”. The time entered for a measuring interval
should be at least twice as high as that number.
7.3.3 ADL-MXmini Settings
In this menu you can setup digital in- and outputs as well as the internal supply voltage
measurement of the ADL-MXmini. The connections DIO1
– DIO8 are useable as in- and
outputs. Therefore you must enable and setup this function at the appropriate connection.
For recording of the supply voltage one must setup the right buffer and enable recording.
7.3.4 Device Settings
All connected devices can be found here. Every device has its own device name. This name
allows an easy assignment for the display of online values and can be freely assigned.
Every device contains at least one group of inputs or outputs. Every group has to be
assigned to one previously configurated buffers via the dropdown list
“Buffer” or it will be
ignored.
Every group consists of at least one channel that can be assigned to a name and a unit. The
name is used when displaying online values and during file export, therefore every name
should be distinct
