38
8. Technical Data
8.1 General
Interfaces
•
3x RS485 ports (300
– 115200 Baud)
•
1x SDI-12
•
1x RS232 V.24 (RXD/TXD/GND)
•
8x digital in-/outputs
(status- or 32bit counter input, switching output)
•
1x Ethernet port (10/100MBit)
•
1x USB-Host (High-Speed USB 2.0)
•
GSM module integrated (Quad-Band, optional LTE)
•
Expansions: CAN-bus module,
analog input module
Protocols
•
Modbus TCP (ABB PVS800)
•
Modbus RTU (ABB PRO 33.0, Huawei,
Thies, Keller, Kipp&Zonen, …)
•
PowerOne Aurora
•
ASCII
•
tensioLINK
•
DKRF (Kern)
•
NMEA-0183
•
and many more
Technical Data
Display:
GLC display 128 x 32 Pixel
Memory:
integrated memory on SD card (standard 1GB)
Data acquisition interval:
1 second - 24 hours
Operation voltage: 10 - 36VDC
Power consumption:
- energy-saving mode:
0,10W (12V, 8,3mA typ.)
- sampling time of 5 min:
0,11W (12V, 9,3mA typ.)
- sampling time of 1 min:
0,16W (12V, 13,3mA typ.)
- sampling time of 10 s:
0,76W (12V, 64mA typ.)
- maximum:
1,80W (12V, 150mA typ.)
Digital in-/outputs:
- inputs:
max. 30VDC, 1[High]:>4VDC, 0[Low]: <1.6VDC,
max. sampling frequency 2kHz
- outputs:
max. 30VDC, max. 100mA, open-drain (high side, +VCC)
Operating temperature range:
-20 bis +70°C
Moisture range:
0 bis 70 % relative humidity (non-condensing)
Case: synthetic material, assembly on DIN EN-rail
Ingress protection: IP 20 on DIN 40 050-9/5.93
Weight:
250g (without antenna)
Size (L/W/H): 107 x 90 x 60 mm
