Meier-NT GmbH · Rittergutsweg 5 · 08297 Zwönitz · Tel. 037754 304 0
Director Dipl. Ing.(FH) Heiko Meier · HRB 25917 District Court Chemnitz
5
1. General Information
Measured data from external measurement devices can be captured and saved via three
RS485 interfaces. Furthermore the data logger offers digital inputs and an Ethernet port for
configuration via the integrated web server, as well as a USB port for backup of data,
memory expansion and connection of sensors or expansions. A GLCD display and four
capacitive keys serve for an easy configuration and the display of current measured data.
The data logger is delivered with a GSM/GPRS module.
The following manual shows how to connect the appliance and will guide you through the
proper use of the device.
2. Safety Information
▪
If the following points are disregarded, the warranty might become invalid!
▪
The safety notes have to be read carefully before the activation of the appliance.
▪
Proper transport, storage, assemblage and installation, as well as careful handling
and maintenance are necessary for the appliance to function impeccable and safe.
▪
Use qualified personnel for the handling of electrical plants. Only qualified and trained
personnel should handle this device. The personnel are qualified if sufficiently
accustomed to assembly, installation and running of the product, as well as warnings
and safety information included in the manual on hand. Furthermore, the personnel
should be trained or authorized to turn off/on, to ground and to label electric circuits
according to safety technology. An appropriate safety equipment and training in first
aid are also necessary qualifications.
▪
Only use supplies and spare parts approved by the manufacturer.
▪
Safety instructions and regulations of the fitting state or country are to be taken care
of.
▪
The environmental conditions mentioned in the product documentation must be
satisfied.
▪
The activation is prohibited unless the overall system serves the national regulations
and safety rules of the application.
▪
The activation is prohibited unless the national electromagnetic compatibility-
regulations are met.
