-17-
MT-50
Series
4-4
Assembling and Operation of Simple
Polarizing
1. Simple polarizing includes analyzer
②
and
polarizer
③
(see Fig. 30).
2. Unplug analyzer dust-cover
①
from the arm,
and insert analyzer face up.
3. Put the polarizer into the condenser
④
groove
as the figure shows.
4. Rotate the polarizer
③
can change the
orthogonal status of polarization.
★
When view field of eyepiece is darkest, it is
polarization.
4-5
Operation of Digital Observation Head
Insert one side of USB data cable into USB
output port on the back of observation head (see
Fig. 31). View the microscope video with two
eyes by the corresponding video capture and
analysis software.
Digital USB interface:
Voltage is 5V, Current
≤500mA.
4-6
Assembling and Operation of the LED
Fluorescence attachment
4-6-1
Assembling and Operation of the LED
Fluorescence Illuminator
1. Fix the light shield
②
on the LED
fluorescence illuminator
③
with the screw
①
.
(See Fig. 32)
2. Put the LED fluorescence illuminator
③
on
the arm
⑤
, and fix it with the lock screw
④
by
the hexagon spanner. (See Fig. 32)
★
Assemble the light shield
②
when
observing in UV lighting.
Fig.
32
Fig. 30
Fig. 31
