26
INSTALLATION (CAMERA)
Installation
●
Camera can be installed on a tripod or a fixing
part from the upper plate or the bottom plate by
using the camera fixing holes (1/4", 20UNC) on
the tripod mounting base. The tripod mounting
base has been installed on the bottom plate
when shipped from factory.
Move the tripod mounting base when installing
the camera from the upper plate.
●
There are two camera fixing holes on the tripod
mounting base. Use the two holes to increase
the fixing intensity when installing the camera
specially.
Camera fixing holes
27
CONNECTIONS
Connect the video output of the camera to the video input of a monitor or other equipment. When using
a "loop through" connection of two or more monitors, set the 75
Ω
switch of only the final monitor to on.
Determine the type of cable according to the distance of the connected equipment.
●
Do not turn any component's power on until all connections are completed.
S-VIDEO
▲
▼
◀
▶
DC-Iris lens
To Lens connector
To Power input terminal
Power Source
(DC12V)
To Video input connector
Composite Video
S-Video
Summary of Contents for SI-C600N
Page 16: ...30 MEMO ...
