9680928
8 / 16
5 Operation: Inserting the bag
DANGER
Cuts to fingers and hands!
Do not activate the blade cover manually if the TopCut is not installed.
TopCut is equipped with a sharp blade at the front. In idle position, the blade is covered
by the cutting unit and is not exposed until the washing chamber door is closed.
Inserting the holder into the device:
Remove the universal vessel holder from the
TopLine device.
Hold TopCut with the right hand.
Move the basket in the direction of the arrow
with your left hand.
Press down the lever with your right-hand
palm and simultaneously push the bracket
forwards until the lever engages in front of the
retaining shoe. Move the basket in the
direction of the arrow.
Insert the bag into the holder:
Insert the bag so that it is centered in front of
the blade as shown (see also the "Suitable
bag types" chapter. Do not throw bags in; the
door could close unexpectedly on you doing
so!
If there is a hose, clamp it under the lever.
Close the door and
start the washing program.
After the program has been completed,
remove the empty bag, which has been
disinfected from the outside.
