WasteStar installation operating instructions FC
9670512
Design and construction subject to change without prior notice!
Page
13
of
40
5
General safety rules
NOTE
The following safety instructions are for your protection as well as the protection of
others and the installation. Compliance with them is therefore absolutely necessary.
5.1
Operator’s duty of care
This installation has been constructed and designed based on a risk assessment
and careful selection of the applicable harmonised standards, as well as additional
technical specifications.
It is therefore state of the art and guaranteed to provide maximum safety. Safety
can only be guaranteed during operation if all necessary measures are taken.
The operator of the installation has an obligation of care to ensure that these
measures are planned for, and also to check that they are correctly implemented.
5.2
Measures to ensure safe system operation
The operator must especially make sure that...
•
... the installation is only used in accordance with the regulations
In case of other use or operation, damage or risks may arise for which we ac-
cept no liability (cf. chapter "Intended use").
•
in order to preserve the operational and safety guarantees, whenever re-
quired, only original parts supplied by the manufacturer are used. The user
loses all potential claims if the system was altered with others than original
spare parts.
•
only appropriately qualified and authorized personnel use, maintain, and re-
pair the installation.
•
the relevant personnel is regularly trained in all questions relating to safety at
work and environmental protection and, in particular, that they are familiar with
the operating instructions as well as with the safety information provided in
them.
•
the installation is only operated in perfect, operationally efficient condition, all
safeguards and cladding panels are installed, and, in particular, that the safety
systems and switch elements are regularly checked for their operational effi-
ciency.
•
the required personal protective equipment is made available to maintenance
and repair personnel, and is worn by them.
•
a functional test on all safety systems of the installation is carried out during
every regular maintenance.
•
all the safety, warning and operating instructions provided are not removed
and are legible.
•
any necessary regular checks on supply parts are carried out. More detailed
information, if required, can be found in the relevant operating instructions.
Summary of Contents for WasteStar FC
Page 40: ......
