WasteStar installation operating instructions FC
9670512
Design and construction subject to change without prior notice!
Page
26
of
40
9.3
Operation of the tank emptying process, collection tank
depressurized without pendulum gas line
CAUTION!
- Circulation is activated after logging in (turning on the key switch)!
- Circulation should take place for at least 15 min.!
- Circulation is deactivated by selecting a "without compressed air" suction process
(pressing the selection button)!
•
(Key) switch "Acknowledge – connection" set to position 1.
•
Tank emptying – connect hose.
•
Option!
"Start without compressed air" - suction power from the disposal vehicle!
•
Press the white illuminated button "Start without compressed air" -- the selected
button will be light up continuously.
•
The selection can be switched off by pressing the "Stop" button and started
again!
•
Emptying can take place.
•
After emptying, the tank vehicle has to be vacuumed for approx. 2 min.
•
Set (key) switch "Acknowledge connection" after emptying to position 0.
•
Disconnect tank emptying hose from "food waste" tank wagon connection.
9.4
Operation of the tank emptying process, collection tank
depressurized with pendulum gas line
- Circulation is activated after logging in (turning on the key switch)!
- Circulation should take place for at least 15 min.!
- Circulation is deactivated by selecting a "without compressed air" suction process
(pressing the selection button)!
•
(Key) switch "Acknowledge – connection" set to position 1.
•
Tank emptying – connect hose.
•
Pendulum gas – connect hose.
•
Option!
"Start without compressed air" - only suction power from the disposal vehicle!
•
Press the illuminated white button "Start without compressed air", and the se-
lected button will light up continuously.
•
The selection can be switched off by pressing the "Stop" button and started
again!
Summary of Contents for WasteStar FC
Page 40: ......