The refrigerator must be placed on a hard, flat ground; if cushioning is
needed, stable, hard, nonflammable cushion blocks shall be used,
rather than the foam backing of refrigerator.
The refrigerator shall be kept away from damp locations where water
is easy to splash; water or dirt shall be removed with soft cloth timely
to prevent rusting which may have an effect on the electrical
characteristics.
Place the refrigerator in a well-ventilated place, reserve a certain
space around and behind the refrigerator, and do not cover or block
the air grille on the rear cover plate of compressor at the back of
refrigerator; Keep the refrigerator away from heat source or direct
sunlight.
Do not carry the refrigerator horizontally or reversely.
Do not carry the refrigerator by holding the door or handle; the
refrigerator shall be carried by lifting the bottom.
Installation
Transport
Place environment
Adjust plastic feet
When the refrigerator stays in the packing box, plastic feet are in
tightened state. After carrying it out from the packing box for
placement, please make sure to adjust two front plastic feet until the
height is suitable; just adjust two plastic feet with a wrench or directly
by hand.
Plastic feet and rear rollers must touch the ground to prevent the
refrigerator from movement, vibration or noise.
When moving the refrigerator, adjust plastic feet counterclockwise to
keep them off the ground, and then push the refrigerator gently to
move it.
12
