8.2 Initial Start of Operation
First install the Meinberg Device Manager software supplied on the USB stick. After the setup, start the
program. If you do not want to perform a setup on your computer, you can start the portable version of the
Meinberg Device Manager software directly on the USB stick:
USB Drive/Software/MbgDevMan/mbgdev-
man_portable/mbgdevman.exe
.
By clicking on the Search Devices button, all available microSync systems that have a serial or a network
connection are recognized by the Meinberg Device Manager and will be listed then.
•
Found systems are displayed with a green dot.
•
Modules that are no longer recognized are displayed with a red dot.
•
Modules whose password or password/user name combination is unknown will be marked with a red x.
Use the corresponding checkbox to select the device
with which you want to establish a connection. With a
microSync system you will then be prompted to enter
your connection data. At the initial start please use
"admin"
for user and
"timeserver"
as password.
32
Date: 29th July 2021
microSync
