11.8.20.4 BPE-8000 - Switchable Backplane Port Expander
Output Signals:
adjustable via the web interface (TTL or Fiber Optical):
PPS, 10 MHz, 2048 kHz, TC-DCLS, Progr. Pulses
or fixed:
2048 kHz (ITU G.703-15), TC-AM
Power Requirements:
5 V +-5%, 150 mA / BNC
5 V +-5%, 150 mA / FO
Status Indicators
LED St:
BPE status
LED In:
Status of the backplane’s output signals
LED A:
BPE status - output signals (1 + 2)
LED B:
BPE status - output signals (3 + 4)
Initialisation:
LED St: blue until USB is configured
LED In - LED B: off until USB is configured
USB is configured:
LED St: blue
LED In - LED B:
0,5 sec. red -> 0,5 sec. yellow ->
0,5 sec. green -> 0,5 sec. off
Normal Operation:
LED St. + LED In: green
LED A: green, if the desired signal is present
on output 1 and output 2
LED B: green, if the desired signal is present
on output 3 and output 4
116
Date: 27th May 2021
IMS - LANTIME M4000
