11 Technical Appendix
11.8.21.1 Pre-selection (PPS, 10 MHz)
Before installing the PIO180 module, select the required signal using the jumper setting
(PPS or 10 MHz). Upon delivery all ports are preset to PPS (Pulse Per Second).
PPS
10 MHz
Mixed operation is not possible.
All inputs/outputs are set to either PPS
or 10 MHz
11.8.21.2 PIO - Configuration via the Web Interface
In the "IO Config" menu of the web interface, each port of the PIO180 can be set separately to "Input"
or "Output. To use the individual ports in
SyncMon
, the direction "Input" must be selected.
IMS - LANTIME M4000
Date: 27th May 2021
131
