Status Indicators
LED St:
MRI status
LED In:
Status of the backplane’s reference signals
LED A:
Status of the input signals (TC-AM/DCLS) at the board
LED B:
Status of the input signals (10 MHz/PPS) at the board
Initialisation:
LED St: blue until USB is configured
LED In - LED B: off until USB is configured
USB is configured:
LED St: blue
LED In - LED B:
0,5 sec. red -> 0,5 sec. yellow -> 0,5 sec. green -> 0,5 sec. off
Normal Operation:
LED St + LED In: green
LED A: green, if timecode AM or timecode DCLS
or both signals are available at the same time
LED B: green, if 10 MHz or PPS
or both signals are available at the same time
Power Requirements:
5 V +-5%, 50 mA
88
Date: 27th May 2021
IMS - LANTIME M4000
