Statistic Types:
HPS cards in PTP or NTP mode support packet statistics which can be monitored individualy:
A:
HPS in PTPv2 Operating Mode.
B:
HPS in Monitoring Mode.
C:
HPS in NTP Mode.
ESI:
This monitoring instance can monitor PPS and Freq nodes with Extension Signal Input (ESI)
card. From a drop down list you can select which particular signal you wish to monitor.
Options available are: PPS0, Freq In0, Freq In1, BITS In2.
MRS-CLK:
This monitoring instance can monitor all activated MRS/XMR input signals for each MRS-
reference clock. From a dropdown list you can select which signal you want to monitor.
Options available are: GNSS/ GPS, NTP, PTP, PPS, IRIG, 10MHz, E1, 2048kHz, - (depending
on HW options (see "Clock" tab in the Web interface).
PIO:
This monitoring instance can monitor PPS and Freq nodes with Programmable Input Output
(PIO) card. From a drop down list you can select which particular signal you wish to monitor.
This depends on the configuration of the PIO card. Options available are: PPS0, PPS1, PPS2,
PPS3, Freq In0, Freq In1, Freq In2, Freq In3.
FDM:
This monitoring instance can monitor 50/60Hz power line networks nodes with Frequency
Deviation Monitor (FDM) card. From a drop down list you can select which particular signal
you wish to monitor. Options available are: time deviation or frequency deviation.
114
Date: 2nd July 2020
LANTIME CPU Expansion Shelf
Summary of Contents for LCES
Page 2: ......
