9.1.8.14 Copy Monitoring Data to external Server via RSYNC as a Backup
In SyncMon Menu in the Web Interface menu "System Settings
→
External Rsync-Server Configuration" you
can configure up to 3 external Servers, where the measured data is copied every hour or once at 00:00 UTC via
the RSYNC protocol. On the external server has to run a service like a standard RSYNC-Server.
In the following dialog you can configure the target servers where you want to store your data.
RSYNC-Server
Figure: External RSYNC server configuration
To automatically send data hourly or once a day via
’rsync’
, you must prepare the ssh key for
the external RSYNC server:
-
Registration via SSH on LANTIME
-
Check if identities are available in
/root/.ssh/id_rsa.pub
.
-
If not, create an identity with
’ssh-keygen -t rsa’
.
-
Save this identity for permanent use with:
’saveconfig @’
.
-
Copy the identity of the LANTIME to the external RSYNC server with:
’ssh-copy-id ip-adresse-of-RSYNC-server’
.
142
Date: 2nd July 2020
LANTIME CPU Expansion Shelf
Summary of Contents for LCES
Page 2: ......
