Meireles MEP 191 XN, User Manual

20

Operation

This manual applies to several appliance variants.  

Some specifications described here may not apply 

to your appliance.

Note:

  Turn on the hood when you start cooking 

and turn it off only after a few minutes later than you 

have finished cooking. The vapor inside the kitchen 

is removed most effectively in this way.

Fan level indicator

Fan On/Off

Fan  Level
Reduction

Fan  Level

Increase

Timer

Lam

On/Off

p

Control area Variant 1

Turning on the fan: Variant 1

Press the On/Off button.

Increase the fan level with     button or reduce the 

fan level with       button.

Fan kademesi göstergesi

Fan On/Off

Fan Kademesi

Küçültmesi

Fan Kademesi

Büyültmesi

Timer

Lamba On/Off

Fan kademesi göstergesi

Fan On/Off

Fan Kademesi

Küçültmesi

Fan Kademesi

Büyültmesi

Timer

Lamba On/Off

Illumination

You may turn on or off the illumination irrespective 

of the fan.

Timer:

   When you press this button for more 

than 2 seconds, a timer function of 15 minutes 

shall be activated, display shall signal when the 

timing function has started and motor shall stop 

automatically after 15 minutes.

Fan kademesi göstergesi

Fan On/Off

Fan Kademesi

Küçültmesi

Fan Kademesi

Büyültmesi

Timer

Lamba On/Off

Control area Variant 2

1

2

3

4

5

1-

 Press this button to turn on the appliance.

2-

 Press this button to operate the appliance in 3rd 

speed.

3-

 Press this button to operate the appliance in 3rd 

speed.

4-

 Press this button to operate the appliance in 3rd 

speed.

5-

 Press this button to turn on lamps of the 

appliance.

This explanation applies to models with push 

button switch.

Cleaning Periods for the Metal Filters:

Filters shall be cleaned every 2 to 3 weeks (as per 

frequency of operation) or when the “C” signal is 

shown on the display. After cleaning and installing 

the filters, press (     ) button (when the appliance 

is turned off) to remove signal “C” for more than 3 

seconds. “E” shall be indicated on the display and 

normal operation shall be resumed. If you want to 

resume operation without removing the “C” signal, 

active speed shall be displayed for 1 second when 

you press the (     ) button and “ C ” signal shall 

be displayed again and the motor shall resume 

operation.

“ C ” sign shall be displayed after 60 hours 

operation of the appliance.

This explanation applies to models with djt 

switch.

Replacement of Halogen Lamps

Disconnect the hood from mains

To replace halogen bulbs, press down from the 

rear side of the lamp socket and pull the lamp 

downwards, then rotate it a little clockwise and 

remove it downwards. 

Figure 15

Figure 15

BOOST INTENSIVE VENTILATION MODE

The model have been purchased has intensive venti-

.lation mode with the intent of energy efficiency

 Boost Mode: Product symbol (b) will be appearing on

. the screen when the latest speed is in use

The symbol b signifies boost mode ( intensive venti-

.lation) is active

 Product will be working along 6 minutes with this

.mode and the symbol b will blink during this time

 At the end of 6 minutes product will be passing to

 lower speed level automatically and will proceed

.working in this speed level
.Note: Timer feature is not used in boost mode