45
1.
The hour and the minute digits will start flashing.
2.
Use the AL/HOUR key to set the hour; MODE/MIN key to set the minute.
3.
Confirm with the SNOOZE key and enter the
Calendar setting
.
Note:
The unit will still try and receive the signal every hour despite it being manually set.
When it does receive the signal, it will change the manually set time into the received
time.
Calendar setting
The date default of the Projection clock is 1. 1. in the year 2005. Once the radio-
controlled time signals are received, the date is automatically updated. However, if the
signals are not received, the date can also be set manually.
1.
The year starts flashing.
