GB
Operation
86
Inflating
Inflating valves without adapter
Some valves such as a Schrader valve or auto valves can be inflated without the need for a
valve adapter. This enables car tyres to be easily inflated, for example. Proceed as follows:
D
E
1. Make sure that the on/off switch
1
is in position “
0
”.
2. Attach the hose of the pneumatic gun
17
to the
pneumatic gun
6
using a 14-mm wrench
(see
Fig. D
).
3. Press the lever on the quick-locking mechanism
19
,
place it on the valve and let the lever go again
(see
Fig. E
).
4. Make sure that the connection is secure.
5. To turn on the compressor, set the on/off switch to
the “
I
” position. You can read the working pressure
on the gauge
4
.
6.
To fill with air, press the trigger
18
and check the
pressure on the gauge.
7.
To deflate, press the drain valve
5
and check the
pressure on the gauge.
8. Once the desired or the maximum allowable
working pressure is reached, set the on/off switch
to the “
0
” position.
9.
If you have finished using the compressor, unplug
the power plug from the power socket and allow the
compressor to cool.
Summary of Contents for 5404300
