GB
Troubleshooting
90
Troubleshooting
WARNING!
Risk of electrocution!
If you open the compressor or repair it incorrectly, it may give you an
electric shock.
–
Never open the casing of the compressor.
–
Have the compressor repaired by an authorised technician or by our
customer service department.
–
If a fault occurs, immediately disconnect the compressor from the
power supply.
No maintenance is necessary for this compressor. If a fault occurs, proceed as follows:
1. Disconnect the power plug from the power socket.
2. Let the compressor cool completely.
3. Check the table below for the cause of the fault.
Fault
Solution
Compressor does not start.
–
Check the mains voltage and power cable, fuse
and socket to see that they are all working.
–
Do not use an extension cord that is too long.
–
Do not use the compressor at an ambient
temperature of less than +5°C.
–
Avoid overheating the motor and allow the
compressor to cool.
Operating pressure too low.
–
Check all seals and the one-way valve and
have them replaced if necessary by a qualified
electrician.
Adapter/nozzle does not work.
–
Check all hoses, the quick connector
3
and
all adapters/nozzles and have them replaced if
necessary by a qualified electrician.
Summary of Contents for 5404300
