42
1 Work area
a
Keep work area clean and well lit.
Cluttered and dark areas invite
accidents.
b
Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust.
Power tools create
sparks which may ignite the dust or
fumes.
c
Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
2 Electrical Safety
a
Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools.
Unmodified plugs and
matching outlets will reduce risk of
electric shock.
b
Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
c
Do not expose power tools to rain
or wet conditions.
Water entering a
power tool will increase the risk of
electric shock.
d
Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts.
Damaged or
entangled cords increase the risk of
electric shock.
e
When operating a power tool
outdoors, use an extension cord
suitable for outdoor use.
Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
f
If it is not possible to avoid using
the electrical tool in a damp
environment, use a residual current
circuit-breaker.
The use of a residual
current circuit-breaker reduces the
risk of an electrical shock.
3 Personal safety
a
Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs,
alcohol or medication.
A moment of
inattention while operating power
tools may result in serious personal
injury.
b
Use personal protective equipment.
Always wear eye protection.
Protective equipment such as dust
masks, non-skid safety shoes, hard
hat, or hearing protection used for
appropriate conditions will reduce
personal injuries.
c
Prevent unintentional starting.
Ensure the switch is in the off-
position before connecting to
power source and/or battery pack,
picking up or carrying the tool.
Carrying power tools with your finger
on the switch or energising power
tools that have the switch on invites
accidents.
d
Remove any adjusting key or
wrench before turning the power
tool on.
A wrench or a key left
attached to a rotating part of the
5401520-Akkuschrau_man 04.12.14 10:58 Seite 42
