29
d
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords
increase the risk of electric shock.
e
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of
a cord suitable for outdoor use reduces the risk of electric shock.
f
If it is not possible to avoid using the electrical tool in a damp environment, use a residual
current circuit-breaker.
The use of a residual current circuit-breaker reduces the risk of an
electrical shock.
3 Personal safety
a
Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication.
A moment of inattention while operating power tools may result in serious personal
injury.
b
Use personal protective equipment. Always wear eye protection.
Protective equipment such as
dust masks, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions
will reduce personal injuries.
c
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with
your finger on the switch or energising power tools that have the switch on invites accidents.
d
Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
e
Do not overreach. Keep proper footing and balance at all times.
This enables better control of
the power tool in unexpected situations.
f
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g
Keep handles dry, clean and free from oil and grease.
Slippery handles do not allow for safe
handling and control of the tool in unexpected situations.
h
If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used.
Use of these devices can reduce dust related hazards.
4 Power tool use and care
a
Do not force the power tool. Use the correct power tool for your application.
The correct
power tool will do the job better and safer at the rate for which it was designed.
b
Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot
be controlled with the switch is dangerous and must be repaired.
c
Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting
the power tool accidentally.
d
Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool.
Power tools are dangerous in
the hands of untrained users.
5400060-Akku-Schra-man 13.09.13 10:10 Seite 29
Summary of Contents for BAS 36 LIO
Page 2: ...2 1 3 9 2 7 4 10 8 3 9 2 5 6 8 1 Abb 2 5400060 Akku Schra man 13 09 13 10 10 Seite 2 ...
Page 3: ...3 Abb 3 Abb 4 5 2 10 4 7 6 Abb 2 3 9 b a 5400060 Akku Schra man 13 09 13 10 10 Seite 3 ...
Page 49: ...49 5400060 Akku Schra man 13 09 13 10 10 Seite 49 ...
Page 53: ...53 5400060 Akku Schra man 13 09 13 10 10 Seite 53 ...
