30
e
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts
and any other condition that may affect the power tool’s operation. If damaged, have the
power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g
Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed.
Use of the power
tool for operations different from those intended could result in a hazardous situation.
5 Use and treatment of the battery-operated tool
a
Only use chargers to recharge the battery that have been recommended by the manufacturer.
When using a charger designated for a particular type of battery, there is a risk of fire if it is used
with other batteries.
b
Only use the batteries designed for use in the electric tools.
The use of other batteries may lead
to injury and risk of fire.
c
When not in use, keep the battery away from paper clips, coins, keys, nails, screws or other
small metallic objects that may bridge the contacts.
A short-circuit between the battery contacts
can lead to burns or fire.
d
Fluid can escape from the battery when used incorrectly. Avoid all contact with this.
In the
event of accidental contact, rinse with water. If liquid should get into the eyes, get medical
assistance. Battery fluid may result in skin irritations and burns.
6 General safety information for battery-powered screwdrivers
Service
a
Have your power tool serviced by a qualified repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is maintained.
7 Safety information for battery-powered screwdrivers
a
Hold the tool by the insulated handle surfaces only when carrying out tasks during which is it
possible that the tools will come across hidden power cables or its own cable.
Contact with a
power-carrying cable can also put metal parts of the unit under power and cause an electric shock.
8 Safety notes for battery/charger
a
Keep the charger away from rain or damp.
Water entering into the charger will increase the risk
of an electrical shock.
b
Only use chargers recommended by the manufacturer to recharge the battery.
When using a
charger designated for a particular type of battery, there is a risk of fire if it is used with other
batteries.
c
Never use to recharge third-party batteries.
The charger is only designed to charge the supplied
batteries using the voltages specified in the Technical Data. Otherwise there is a risk of fire or
explosion.
d
Keep the charger clean.
Contamination will increase the risk of an electrical shock.
e
Check the charger, cable and plug each time you use the unit. Do not use the charger if you
find any damages. Never open the charger up yourself, have it repaired by a qualified
5400060-Akku-Schra-man 13.09.13 10:10 Seite 30
Summary of Contents for BAS 36 LIO
Page 2: ...2 1 3 9 2 7 4 10 8 3 9 2 5 6 8 1 Abb 2 5400060 Akku Schra man 13 09 13 10 10 Seite 2 ...
Page 3: ...3 Abb 3 Abb 4 5 2 10 4 7 6 Abb 2 3 9 b a 5400060 Akku Schra man 13 09 13 10 10 Seite 3 ...
Page 49: ...49 5400060 Akku Schra man 13 09 13 10 10 Seite 49 ...
Page 53: ...53 5400060 Akku Schra man 13 09 13 10 10 Seite 53 ...
