72
possible that the tools will come
across hidden power cables or its
own cable.
Contact with a power-
carrying cable can also put metal
parts of the unit under power and
cause an electric shock.
8 Safety notes for battery/charger
a
Keep the charger away from rain or
damp.
Water entering into the
charger will increase the risk of an
electrical shock.
b
Only use chargers recommended
by the manufacturer to recharge
the battery.
When using a charger
designated for a particular type of
battery, there is a risk of fire if it is
used with other batteries.
c
Never use to recharge third-party
batteries.
The charger is only designed
to charge the supplied batteries (Li-Ion)
using the voltages specified in the
Technical Data. Otherwise there is a
risk of fire or explosion.
d
Keep the charger clean.
Contamination
will increase the risk of an electrical
shock.
e
Check the charger, cable and plug
each time you use the unit. Do not
use the charger if you find any
damages. Never open the charger up
yourself, have it repaired by a
qualified specialist only and with
original replacement parts.
A damaged
charger, cable or plug will increase the
risk of an electrical shock.
f
Never operate the charger on a
surface that will burn easily (for
example, paper, textiles etc) or in a
flammable environment.
There is a risk
of fire occurring as a result of the heat
generated during the charging process.
g
Fluid can escape from the battery
when used incorrectly. Avoid all
contact with this. In the event of
accidental contact, rinse with water. If
liquid should get into the eyes, get
medical assistance.
Battery fluid may
result in skin irritations and burns.
h
Do not open the battery.
There is a risk
of short-circuiting.
i
Protect the battery from heat, for
example, from constant sun and fire.
There is a risk of explosion.
j
Never short circuit the battery.
There is a risk of explosion.
k
In the event of damages and
incorrect use, vapours may come out
of the battery.
Ensure plenty of fresh air
and, if you have any symptoms, consult
a doctor. These vapours may irritate the
respiratory system.
6 – Safety instructions
relating specifically to
the equipment
CAUTION! LED is laser class 1!
Do not look directly into the
laser as this may result in damage to
the eyes.
• Use the appliance, the charger and the
attachments, only for their intended
applications!
• Before laying the stick screwdriver
aside, ensure that all moving parts
have come to a standstill.
• Avoid frequent blocking when drilling,
tightening or loosening screws.
• Connect the charger only to a 230 V
AC power supply.
MC-5450520-Bediene-1308 02.08.13 08:23 Seite 72
Summary of Contents for i-drill MAS12ib 2.0
