62
Noise/vibration information
Measured values determined in
accordance with EN 60745-1:2009,
EN 60745-2-2:2010.
The specified vibration emission value
was measured in accordance with a
standardised test procedure and can be
used in order to compare one electrical
tool with another.
The specified vibration emission value
can also be used for preliminary
evaluation of the disturbance.
CAUTION! The vibration emission
value may fluctuate from the
specified value during use of the
electrical tool. These fluctuations will
depend on the way in which the tool is
used.
Safety measures must be taken in order
to protect the operator. As a result, the
evaluation of the disturbance must be
made whilst taking account of the actual
conditions of use. (All parts of the
operating cycle must be taken into
account for this purpose. This also
includes times in which the tool is
switched off and times in which it is
switched on, but is running without load.)
3 – Components
1 ON/OFF switch
2 Selector switch for clockwise or
counterclockwise rotation
3 Light switch
4 LED working light
5 Bit holder
6 Grip release
7 LED-indication Charging/clockwise/
counterclockwise rotation
8 Screwdriver grip
9 Charging socket
10 Charger
11 Charging plug
4 – Correct use
Tightening and loosening screws. Use
the appliance, the charger and the
attachments, only for their intended
applications; observe manufacturer’s
instructions! All other applications are
expressly excluded.
The machine is intended only for use in
the household.
This unit may not be used by people
(including children) with reduced physical,
sensory or mental capacities, with a lack of
experience and without the appropriate
knowledge, unless they are supervised by
someone who is responsible for their safety
or have been instructed by such a person
with regard to how the unit is to be
operated. Children should be supervised to
ensure that they do not play with the
device.
Improper use of the product
All applications carried out with the device
that are not listed in the „Proper use“
chapter will be considered improper use.
Uses for which the tool is not designed may
cause risks and injury. Do not use
accessories that are not intended
specifically for this electrical tool.
Tool inserts that do not fit precisely to the
sanding spindle of the electrical tool will
rotate unevenly, vibrate very heavily and
may lead to a loss of control.
5450030-Schrauber-man_a 24.03.11 16:11 Seite 62
