69
•
Starting:
Press the ON/OFF switch (1): The
screwing process will start. Press and
keep the switch during the screwing
process.
•
Stopping:
As soon as the screw has been fully
screwed in or unscrewed, release on/off
switch. The screwing process is ended.
Manual operation
When switched off, the drive
shaft is automatically locked. In
this state it can be used
manually for over-tight screws.
Resetting screwdriver grip
To achieve a more favourable working
position for the job in hand, push grip
release (6) towards the bit holder (5) and
turn the screwdriver grip (8) clockwise as
far as the stop. Allow grip release to
slide back (Fig. 6).
LED working light
CAUTION! LED is laser class 1,
EN 60825-1: 2002! Do not look
directly into the laser as this may
result in damage to the eyes.
To enable you to see better in
darker areas, the LED work
light (4) can be switched on or
off by means of the light switch (3) (Fig. 1).
9 – Maintenance and
environmental protection
Clean the case only with a damp cloth –
Do not use solvents! Then dry well. To
maintain capacity, we recommend
completely discharging and recharging
the battery every two months. Store only
fully charged batteries. They should
therefore be recharged from time to
time. The place of storage must be dry;
the ambient temperature must not fall
below 0 °C or rise above 40 °C.
CAUTION! Electrical and battery
operated units that no longer work
should not be disposed of in the
household waste! They are to be
collected separately, in accordance with
the 2002/96 EC directive for the disposal
of electrical and
electronic waste, and
sent for proper and
environmentally-
friendly recycling.
ATTENTION! Batteries must be
removed from battery-powered
tools and disposed of separately in
accordance with relevant waste-
battery regulations. Batteries must
never be disposed of with domestic
waste!
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types
complying with local rules and
regulations. For details, please contact
your municipal authority concerned.
10 – Service instructions
• Store the machine, operating instructions
and where necessary the accessories in
the original packaging. In this way you
will always have all the information and
parts ready to hand.
Li-Ion
5450030-Schrauber-man_a 24.03.11 16:11 Seite 69
