95
Noise emission/vibration
Noise emission
Sound power level L
WA
: 76 dB(A)
Uncertainty K
WA
: 3,0 dB(A)
Sound pressure level L
pA
:
≤
70 dB(A), (65 dB(A))
Uncertainty K
pA
: 3,0 dB(A)
Hand/arm vibrations
Drilling into metal a
h,D
:
≤
2.5 m/s
2
(0.934 m/s
2
)
Uncertainty K: 1.5 m/s
2
Driving screws a
h
:
≤
2.5 m/s
2
(0.741 m/s
2
)
Uncertainty K: 1.5 m/s
2
Noise/vibration information
Measured values determined in accordance with EN 60745-1, EN 60745-2-1
and EN 60745-2-2.
The specified vibration emission value was measured in accordance with a
normed test procedure and can be used in order to compare one electrical tool
with another.
The specified vibration emission value can also be used for an introductory
evaluation of the influence.
CAUTION! The vibration emission value may
fluctuate from the specified value during use of the
power tool. These fluctuations will depend on the
way in which the power tool is used.
Safety measures must be taken in order to protect the
operator. As a result, the evaluation of the influence
must be made whilst taking account of the actual
conditions of use. (All parts of the operating cycle must
be taken into account for this purpose. This also
includes times in which the power tool is switched off
and times in which it is switched on, but is running
without load.)
5451240-Akkubohrsc_man 27.02.15 10:31 Seite 95
