damages to the screw or drill heads. By
rotating the head on your cordless
screwdriver/drill, you can select the
required level, from 1 (easy screwdriver
action) through to maximum (heavy-duty
screwdriver/drilling action
). Always
choose the most suitable torque for the
task in hand.
The 90°-position (Figure 6) enables, with
the help of the spirit level integrated in
he housing (2), the exact positioning of
the device at a right-angle for vertical
screwing and drilling.
10 – Maintenance and
environmental
protection
Clean the case only with a damp cloth –
Do not use solvents! Then dry well. To
maintain capacity, we recommend
completely discharging and recharging
the battery every two months. Store
only fully charged batteries. They should
therefore be recharged from time to
time. The place of storage must be dry;
the ambient temperature must not fall
below 0 °C or rise above 40 °C.
CAUTION! Electrical and battery
operated units that no longer
work should not be disposed of
in the household waste! They are to
be collected separately, in
accordance with the 2012/19/EU
directive for the disposal
of electrical and
electronic waste, and
sent for proper and
environmentally-friendly
recycling.
ATTENTION! Batteries must be
removed from battery-powered
tools and disposed of separately in
accordance with relevant waste-
battery regulations. Batteries must
never be disposed of with domestic
waste!
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types
complying with local rules and
regulations. For details, please
contact your municipal authority
concerned.
11 – Service instructions
• Store the machine, operating
instructions and where necessary the
accessories in the original packaging.
In this way you will always have all
the information and parts ready to
hand.
• Meister devices are to a large extent
maintenancefree, a damp cloth being
sufficient to clean the casing. Please
note additional hints given in the
operating instructions.
• Meister devices are subject to stringent
quality control. If however a functional
fault shoult occur, send the device to
our servicing address. The repairs will
be carried out in a short time.
• A brief description of the defect
speeds up the faulttracing and repair
time. If within the guarantee period,
please enclose the guarantee
document and the proof of purchase.
• In so far as a repair under guarantee
is not concerned, we will charge the
repair costs to your account.
PLEASE NOTE! Opening of the
device invalidates the guarantee
claim!
47
5451420-Akkubohrsc_man 04.12.14 10:16 Seite 47
Summary of Contents for MAS18V-22
Page 3: ...3 Abb 5 Abb 6 Abb 4 2 1 5451420 Akkubohrsc_man 04 12 14 10 16 Seite 3 ...
Page 80: ......
Page 81: ... Sekil 5 ...
