If the screw is screwe d into too far, there is a risk
of over winding. This may damage the cordless
screwdriver and the workpiece.
Observe the screwing procedure and end the
screwing process before the screw head bites into
the workpiece. Tighten the screw with a hand-held
screwdriver. Carry out tests to familiarise yourself
with the operation of the power tool.
• Switching on:
Push the On/Off switch with integrated light switch (5).
The screwdriver starts. Hold the switch down while
driving the screw.
• Switching off:
Release the On/Off switch with integrated light
switch as soon as the screw has been screwed in/
out fully.
The screwdriving process is complete and the
working light goes out.
• LED working light
CAUTION!
Risk of injury!
Never look directly into the light beam of the LED
working light and do not direct the light into the
eyes of others. This may cause permanent damage
to eyes.
116
MW-5450080-Bedien-1903.indd 116
05.04.19 11:58
