9 – Troubleshooting
Many problems can be caused by minor errors,
which you can rectify yourself. Follow the
instructions contained in the following table.
If the fault on the cordless screwdriver cannot be
rectified please contact Customer Services.
Do not repair the cordless screwdriver yourself.
Problem
Possible cause
Remedy
The cordless
The battery power
Charge the battery
screwdriver does is too weak.
(see chapter „Charging
not start.
the battery“)
The right/left rotation Push right or left
is set to the centre
fully.
position.
The rechargeable The charger is not
Plug the connector
battery is not
fitted correctly.
of the charging cable
charging.
fully and directly into
the charging socket (4)
of the cordless screw -
driver.
The plug is not
Check that the plug
properly inserted.
is properly inserted.
There is no power
Check the socket by
at the socket.
connecting another
device.
118
MW-5450080-Bedien-1903.indd 118
05.04.19 11:58
