39
• Use the additional handle supplied
with the unit. Loss of control of the
unit may lead to injuries
6 – Safety instructions relat-
ing specifically to the
equipment
• Always switch on the device before
introducing it to the workpiece.
• Materials containing asbestos may
not be processed. When working with
any other materials containing fibres,
use dust protection masks and
extraction systems.
• If you wish to use the device out-
doors, ensure it is connected via a
residual current circuit breaker.
Extension cable and plug must be
designated for use outdoors.
• Only use for dry sanding work.
• Breathing in dust from sanding is a
health risk, therefore always work with
the dust extraction function activated.
If necessary, use a mask.
• Only attach accessories with hook
and eye coatings to the sanding plate.
• The dust extraction openings of the
sand paper and the sanding plate
must match, as far as possible.
• When sanding, do not put excessive
pressure on the machine in order to
prevent the machine from coming to a
standstill.
• Secure the work piece to prevent it
from slipping by using tensioning
mechanisms.
• Make sure that cables always lead
away from the work place.
• During operation, always guide the
device with both hands and ensure
that you are standing firmly.
• The device should never be allowed
to get wet and should not be operat-
ed in a damp environment.
• Prior to each use, check the device,
the cable and the plug. Any damages
should only be repaired by a special-
ist. Only plug the device into the
socket when the machine is switched
off.
• When carrying out work in which dust
is generated, wear a face mask and
safety goggles – do not smoke and
avoid naked flames.
• When using sanding sheets and han-
dling rough materials, wear gloves.
• Wear ear-protectors.
• Wear safety goggles.
• Before carrying out any work on the
machine, pull the plug out of the
socket.
• Do not leave keys in the machine.
MW-5457200-Bedien-2005.indd 39
MW-5457200-Bedien-2005.indd 39
07.05.20 12:20
07.05.20 12:20
