1 – Scope of delivery
• 1 hammer drill
• 1 auxiliary handle
• 1 drilling depth stop
• operating instructions
• guarantee certificate
2 – Technical information
Technical data
Power supply
220–240 V~/50 Hz
Nominal
consumption
750 W
Rotational speed
n
0
: 0-2,800 min
-1
Impact rate
(without load)
0–47600 min
-1
Spindle collar diameter 43 mm
Maximum
diameter
13 mm
Maximum drill diameter
– in concrete
13 mm
– in steel
10 mm
– in wood
32 mm
Feed cable
300 cm
Weight
2.45 kg
Technical changes reserved.
Noise emission/vibration
Noise emission
L
pA
: 93 dB(A), L
WA
: 104 dB(A).
Measuring inaccuracy:
K
pA
: 5.0 dB(A), K
WA
: 5.0 dB(A).
Hand/arm vibrations
Drilling in metal a
h, D
:
Handle (2)
6,9 m/s
2
Auxiliary handle (8)
5,0 m/s
2
Measuring inaccuracy K: 1.5 m/s
2
Hammer drilling in concrete a
h, ID
:
Handle (2)
19,8 m/s
2
Auxiliary handle (8)
16,8 m/s
2
Measuring inaccuracy K: 1.5 m/s
2
Noise/vibration information
Measured values determined in accord-
ance with EN 62841,1;
EN 62841-2-1.
Operating instructions & safety hints
WARNING! To reduce the risk of injury, please read the operating instruc-
tions through carefully before using the device, and then store with the
machine! When passing the device on to another user, these operating inst-
ructions must also be included!
GB
Page
1 – Scope of delivery
39
2 – Technical information
39
3 – Components
40
4 – Correct use
41
5 – General safety
instructions
42
6 – Safety instructions
relating specifically to
the equipment
45
Page
7 – Installation and setting
45
8 – Operation
47
9 – Mode of operation
47
10 – Storage and
transportation 48
11 – Maintenance and
environmental
protection
48
12 – Service instructions
48
Contents
39
5452220-Schlagbohrmaschine_man.indd 39
5452220-Schlagbohrmaschine_man.indd 39
17.07.20 06:49
17.07.20 06:49
