MEITRACK iButton
User Guide
Copyright © 2015 Meitrack Group All rights reserved. - 9 -
2.
Meitrack Manager will automatically detect the device, and the
Device
tab page for default parameters is displayed.
3.
Select
Authorize
. On the tab page that is displayed, select
RFID
on the
GPRS
column.
Note: If this RFID option is deselected, the MS03 platform cannot collect statistics on iButton event reports after you swipe an
iButton key. The RFID event is enabled by default.
7.5
Configuring iButton by MS03
You can authorize, delete, query, and manage iButton keys on MS03. Related commands are as follows:
Function
Command
Authorize iButton keys
Authorizing an RFID Card – D10
Authorizing RFID Cards in Batches – D11
Delete iButton keys
Deleting Authorized RFIDs in Batches – D15
Manage iButton keys
On the
Management
page, set
driver info
and
RFID card
.
Query iButton keys
Checking RFID Authorization – D12
7.5.1
Authorizing iButton Keys
1.
On the main interface, choose
Management
.
2.
On the
Management
window that is displayed, select
Sending command
from
Use Normal
. The
Sending command
window is displayed.
3.
Select one or multiple trackers, select the
Batch RFID authorization
command, specify
From the RFID number
and
Quantity
, and click
Send command
.
If only one iButton key needs to be authorized, set
Quantity
to
1
.