2.
Remove the element assembly (2).
3.
Check element for holes or tears and replace if necessary.
4.
To clean the element wash in a solution of household detergent and warm water, then rinse thoroughly or wash in a
nonflammable solvent. Allow drying thoroughly. Soak the element in clean engine oil and squeeze out excess oil. Too
much oil will cause engine to smoke on initial start-up.
5.
Do not use a brush to remove dirt. This can push dirt into the fibers. Replace the filter if it is excessively dirty.
6.
Wipe out the inside of the cover with a damp cloth.
7.
Reassemble the air cleaner.
FASTENING HARDWARE
Check all fastening hardware to ensure it is all adequately tightened and that none is missing or broken.
8-3
Summary of Contents for MX110
