Operating Manual MELAdoc label printer
12
Setting the date
7. Pull out the setting wheel to change the personal number, date etc.
8. Move the marker (see detailed diagram) to the position to be changed. Turning the black
wheel sets the desired value.
9. After having set the value, return the wheel to its starting position.
Inserting the inking roller
Open the device to insert the inking roller
(see page 9,
Opening the label printer
)
1. Open the packaging of the inking roller and
remove it.
2. Hold the inking roller horizontal by its ends
as depicted.
3. Insert the inking roller in the bracket using
a little pressure until it clicks.
Note!
Do not touch the inking roller at any point
other than at its both ends. Otherwise, the
ink will colour.
