15
29.
Any modification to the stove can be dangerous.
30.
Warning: do not use flames to check for gas leaks!
INSTALLATION:
•
Place the stove flat, as indicated above.
•
Check that the gas pipe to be used is approved and is connected to
a pressure reducer with the characteristics described above.
•
Use a metal clamp for LPG for the gas pipe.
•
Insert the hose on the fitting (on the back of the stove) for at least
2 cm.
•
Tighten the metal clamp around the pipe to prevent gas leaks.
ASSEMBLING THE CYLINDER:
•
Before connecting the cylinder, close all the taps on the stove.
•
Place the cylinder in a stable and dry place.
•
Connect the pressure regulator by inserting the gasket that is
usually supplied with the cylinder.
•
Always use the new gasket that is supplied.
•
Tighten the regulator onto the cylinder (left thread).
•
Check that the gas pipe is not kinked. Rotate the tube to eliminate
any bends.
•
Open the tap on the cylinder.
•
Leave the stove taps closed for 5 minutes and check that there is
no smell of gas.