10
“Zero” or “Tare” function
To weigh different loads consecutively without removing loads from the scale.Put first
load on the scale, get weight reading. Press Z/T button to reset the LCD reading to “0”
before adding next load. You can repeat this operation.
Condition 1: ZERO function
When total sum of all loads on scale < 4%
of scale’s max. weight capacity
(4% = 80g when capacity is 2Kg
200Kg when capacity is 5Kg)
LCD will show “----” or “0g” each time Z/T is
pressed. “---” means not stable, please wait for
a moment. “0g” and meanwhile an icon “ZERO”
on lower left corner of LCD mean “ZERO”
function is active. Max. capacity remains
unchanged.
Condition 2: TARE function
When total sum of all loads on scale < 4%
of scale’s max. weight capacity
(4% = 80g when capacity is 2Kg
200Kg when capacity is 5Kg)
LCD will show “----” or “0g” each time Z/T is
pressed. “----“ means not stable, please wait
for a moment. “0g” and meanwhile an icon
“TARE” on upper left corner of LCD mean
“TARE” function is active. Max. capacity is
reduced by total weight of all loads.
1. Current temperature is shown at the higher right corner of LCD.
2. Temperature range: 0~+40 o C
3. Division: 0.5 o C
Temperature sensor
