Product Description(Figure 1.)
Fig. 1
1
Plastic bowl and measuring cup
2
The cover lid and vent
3
Transparent plastic cover
4
The central lock button
5 Stirring rod
6 Non-stick frying
7 Heat-resistant stand base
8 The switch button
Using Instruction
l
Put the transparent plastic cover(3) on the heat-resistant stand base
l
Slowly put about 80 grams of corn into the non-stick frying plate through the cover lid and
vent(2). You could open the lid when the corn grain is too large to pass through the hole.
WARNING:Do not switch on the Popcorn Maker before pouring the corns.
l
Plug the power cord, and press the switch button. Here the stirring rod(5)begins to rotate,
the corn started to be heated.
l
When heating, do not place the plastic bowl and measuring cup on the plastic
transparent cover(3) at he top of the cover lid and vent(2).
l
With 3-5 minutes, the corn will begain to be poped. The poped speed gradually
accelerated. When speed slows down, corn has fully burst. Swtich off the botton, and
then unplug the power cord from electricity. The process will last about 3--9 minutes. The
time varies according to corn volume.
l
Grasp the handles of the stand base and the lid, place the body and transparent cover
upside down,put the popcorn into the transparent cover. Then, put aside the cover for
next using. Here the transparent cover is used as a large bowl and now we could taste
the popcorn. Adding some salt or sugar, the corn will be much more sweet and delicious.
l
In addition, please keep the product 15-20 minutes out of working in order to cool it
before next use.
