- 35 -
D11 : CWIWIW FLW
Indicates whether the machine origin address of the CWIWIW drive is recorded.
1 : The absolute address of the machine origin is recorded.
0 : The absolute address of the machine origin is not recorded.
D12 : DWST
Indicates the current output status of the DWST signal.
1 : High level output in progress (active level output in progress)
0 : Low level output in progress
D13 : DEWD
Indicates the current active status of the DEWD signal.
1 : Active level input in progress
D14 : DALM
Indicates the current active status of the DALM signal.
1 : Active level input in progress
D15 : DEWD BCSY
Indicates that the system is waiting for detection of the active level of the DEWD signal.
1 : Pulse output is complete and the system is waiting for detection of the active level of the DEWD
signal.
0 : This bit is cleared upon detection of the active level of the DEWD signal.
◆ Either of the following types of forced end also clears the DEWD BCSY bit:
・ Forced end by the DEWD EWWCW function
・ Detection of active status of an immediate stop command
◆ DEWD BCSY = 1 indicates that drive is in execution.
◆ This bit is valid when the DEWD signal is validated by the SEWVC SPEC SET command.