- 30 -
Menu System
Press the "
" button. The Main menu will be dis-
played at the middle on the screen.
6281'
3,&785(
)($785(
,167$//
352*5$0
To select a sub-menu use or button, and
press or button. Each option can also be
selected with the coloured button on the remote con-
trol.
The short way in order to enter the menus, press :
"
" Button,
Main Menu.
Red Button,
Sound Menu.
Green Button,
Picture Menu.
Yellow Button,
Feature Menu.
Blue Button,
Install Menu.
Menu button has two functions; first is opening or
closing the "MAIN MENU", and the second is closing
the sub-menu and then opening its parent menu.
Sound Menu
Enter the Sound Menu directly, pressing the Red
button or,
As you enter the main menu, sound will be the first
selected option. In the main menu, select
SOUND
using or
button, then enter the sound
menu pressing or button.
Setting Volume
As you enter the sound menu, Volume will be the first
selected option.
Press button to increase volume.
Press button to decrease volume.
Or you can directly change the volume settings using
V+
(to increase) or
-V
(to decrease) button.
Setting AVL
Automatic Volume Limiting (AVL) function normalizes
sound to obtain fixed output level between programs,
having different sound levels. Pressing or
button will turn on and off this feature.
To Store the Settings
Press or button on
STORE
option to
store Sound menu settings.
Picture Menu
To enter the Picture menu directly, press the
GREEN
button.
Setting the Brightness, Contrast, Colour and the
sharpness
After selecting with the
or
button Bright-
ness, Contrast, Colour and the Sharpness settings
can be changed with the or buttons.
%5,*+71(66
&2175$67
&2/285
6+$531(66
02'(
6725(
Mode
This item is used to change the picture size. By press-
ing or button you may choose one off three
options. These are, 4:3, 16:9 and AUTO. It is
also possible to change picture modes directly by
pressing button
on your remote control.
AUTO
This option is available only if your TV has
WSS feature. This allows to change the picture
mode automatically, according to the transmission
of the selected channel. For example, your TV is
4:3 mode, but the transmission of that channel is in
16:9 mode. If you select the AUTO mode, the TV is
switched to 16:9 mode automatically. If the TV is in
4:3 mode and the picture ratio of the channel is also
4:3, there will be no affect selecting the picture
mode to AUTO mode.
WSS feature is only used in TV and F-AV modes. For
the Picture Mode selection in AV-1 the pin 8 (of Scart)
value is used. In RGB mode the Picture Mode can be
4:3 or 16:9 (Auto mode is not available.).
When the menu appears on screen, picture mode
will automatically change to its default tube mode (4:3
or 16:9) but it will turned to its stored mode when the
menu disappears.
50083968-4-1428-FAV-ENG-1243 UK-AK36-PLL (FREKANS)-MN1P-T3X (COST).p65
31.08.2006, 14:05
30
Summary of Contents for MTP 1406VS135
Page 19: ...50083968 ...
