- 33 -
Other Features
Blue Background During No-Signal
In case, no valid signal is detected (in AV mode) Blue
Background is activated. During search process Blue
Background is not active. But instead of it there is
another feature given; the semitransparent menu
background is made blue.
AV Modes
By pressing the
AV
button you can switch your TV
to AV modes (except being in Teletext). Pressing this
button consecutively TV will switch to the AV modes:
AV-1, F-AV, RGB.
AV-1 supports the RGB mode. But if there is some
colour problem in AV-1 mode, please force the AV
mode to RGB mode.
In order to quit the AV mode press the
TV
button.
Teletext
Teletext is an information system that displays text on
your TV screen. Using the Teletext information sys-
tem you can view a page of information on a subject
that is available in the list of contents (index).
On screen display is not available in text mode.
Contrast, brightness or colour control is not avail-
able, but volume control is available in text mode.
To operate Teletext
Select a TV station on which Teletext is being trans-
mitted.
Press (TELETEXT)
TXT
button. Usually the list of
contents (index) is displayed on the screen.
To select a page of Teletext
Press the appropriate digit buttons for the required
Teletext page number.
The selected page number is displayed at the top left
corner of the screen. The Teletext page counter
searches until the selected page number is located,
so that the desired page is displayed on the screen.
Press
P+
button to move the Teletext screen
forward one page at a time.
Press
P-
button to move the Teletext screen back-
ward one page at a time.
To exit Teletext
Press
TV
button. The screen will switch to TV
mode.
Connect Peripheral Equipment
Via the Euroconnector
Your TV set has a Euroconnector socket. If you want
to connect peripherals (e.g. video, decoder, etc.)
which have Euroconnector, to your TV, use
SCART1
input.
If an external device is connected via Euroconnector
socket TV is switched to AV mode automatically.
Via Ant Input
If you want to connect to your TV, peripherals like video
recorders or decoders, but the device you want to
connect does not have Euroconnector, you should
connect it to the ANT input of your TV set.
If the VCR is connected via antenna input it is sug-
gested to use the Programme 0.
TV and Video Recorder
Connect the aerial cables.
Better picture quality can be obtained if you also con-
nect a eurocable to
EXTERNAL socket
.
Camera and Camcorder
To connect to Front-AV input (FAV)
Connect your camera or camcorder at the front side
of your TV.
Connect your equipment to the TV via
VIDEO
and
AUDIO
inputs. You should connect the jacks to the
input in the same colour.
Connecting Headphones
Use the stereo headphone socket (HP) on the lower
front / right side of your TV, to connect headphones.
50083968-4-1428-FAV-ENG-1243 UK-AK36-PLL (FREKANS)-MN1P-T3X (COST).p65
31.08.2006, 14:05
33
Summary of Contents for MTP 1406VS135
Page 19: ...50083968 ...
