- 15 -
Setting up the illuminated Figure
Take the Illuminated Figure from its
>
packaging.
Remove all transportation fasteners and
>
tapes/foils.
Place the Illuminated Figure on a
>
suitable surface.
Carefully pull the two wire elements apart,
>
on the Christmas tree figure (KH4222)
and the Snowman figure (KH4220),
so that the figures can stand alone.
If necessary, secure the illuminated figures
>
to the ground with the supplied ground
spikes.
Connect the Illuminated Figure with
>
a correctly installed 230 V domestic
power wall socket.
When you wish to turn off the illumina-
>
tion function of the Illuminated Figure,
remove the plug from the wall socket.
During the periods in which the Illumi-
>
nated Figure will not be in use, please
store it in its packaging.
Cleaning and Care
Risk of potentially fatal
electrical shock:
First remove the plug from the power
•
socket.
NEVER submerse the Illuminated Figure
•
in water or other fluids!
Do not allow any liquids to permeate
•
into the Illuminated Figure.
Before you start cleaning it, allow the Illu-
>
minated Figure to cool down if need be.
Cleaning the Rope Light:
Clean the rope light with a lightly mois-
>
tened cloth. NEVER use petrol, solvents
or detergents that can damage plastics!
Maintenance
The illuminated figure contains no parts
•
that can be serviced by the consumer.
Disposal
Do not dispose of the device in
your normal domestic waste.
This device is subject to the European
Guidelines 2002/96/EC.
Dispose of the appliance through an
•
approved disposal centre or at your
community waste facility.
Observe the currently applicable regu-
•
lations. In case of doubt contact your
disposal facility.
Dispose of all packaging materials
in an environmentally friendly
manner.
IB_KH4218_23_32998_LB5new.indd 15
IB_KH4218_23_32998_LB5new.indd 15
18.06.2009 8:37:20 Uhr
18.06.2009 8:37:20 Uhr
